Skunk2 Racing Pro Series Hard Anodized Rear Camber Kit for 2006-2011 Civic
eBay Rear Camber Kit for 2006-2011 Civic
Next, have a friend who owns a lift
Comes in handy when trying to get road salt off from underneath the car and when I get all my underbraces
After removing the wheel, you can remove the bolt holding the current arm to the spindle 14mm
Next remove the 2 14mm bolts holding the opposite end of the arm. You'll need a swivel and/or some finessing to get the back bolt on the passenger side since the exhaust is in the way. There is a bracket also attached to the passenger side arm. You won't need this.
Set the new arms next to the old ones and adjust the end on your new arm so it is the same length as the old one. Install them the same way they came off and you're done.
Here are some after the install
VIDEO TUTORIAL
More Stories
Maxpeedingrods 88-91 Civic CRX Front Traction Bar
DIY: Front Camber Kit Install
DIY: EF Fuel Pump Gasket